Well when I do the snmpwalk I get snmpwalk: Timeout I know snmp service is installed and running on the target machine.
Does this mean I don't have the mibs loaded on to the target machine or something? Joel A. Savage Systems Administrator (IT) Franklin Pierce University 40 University Drive Rindge, NH 03461 (603) 899-4335 http://www.franklinpierce.edu [EMAIL PROTECTED] -----Original Message----- From: Chris Cariffe [mailto:[EMAIL PROTECTED] Sent: Friday, May 23, 2008 3:04 PM To: Joel A Savage Subject: Re: [mrtg] Discouraged with CPU counter snmpwalk -c your_community_string your_dell_server .1.3.6.1.2.1.25.3.3.1.2 this oid should return the cpu's from a dell box On Fri, May 23, 2008 at 11:12 AM, Joel A Savage <[EMAIL PROTECTED]> wrote: > For the last 3 days I have been trying to get my MRTG instance to read > the cpu of a windows 2003 server > > So far I have had no luck, tried a multitutde of cfg's oid's etc no > luck. > > I am going to start from ground zero here > > The mrtg machine is a vm of slackware 12 > > The windows machine is a dell PE 1650 > Is there anything other than the snmp service that needs to be setup on > the windows machine? > > Any advice is greatly appreciated > > I am about ready to shove a 1/4 stick into the server. > > > > > > > _______________________________________________ > mrtg mailing list > [email protected] > https://lists.oetiker.ch/cgi-bin/listinfo/mrtg > _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
