Hi Steve, I have done which you recommend and check OID with snmpget. I got correct value with snmpget but my mrtg daemon doesn’t run.
I had made mrtg.cfg with cfgmaker and then I added one line in mrtg.cfg as below. Target[as5400_DS0_in-Use] : 1.3.6.1.4.1.9.10.19.1.1.4.0:[EMAIL PROTECTED] Without adding The daemon run , but with adding the above line , the daemon doesn’t run. Please point me out what’s wrong. Regards, 보낸 사람: Steve Shipway [mailto:[EMAIL PROTECTED] 보낸 날짜: Sunday, July 27, 2008 3:01 PM 받는 사람: 'David Kim'; '[email protected]' 제목: RE: [mrtg] OID in mrtg.cfg Omit the leading ‘.’ In the OIDs. Also, check that these OIDs are correct - sometimes you need to add a trailing ‘.0’ to them. Steve _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Kim Sent: Saturday, 26 July 2008 08:37 To: [email protected] Subject: [mrtg] OID in mrtg.cfg Hi All, I’d like to monitor DS0 usage for 24hrs a day and I have put below text at bottom of my mrtg.cfg and run it again. But my mrtg.cfg doesn’t run with these text. We run mrtg on windows. Target[as5400_DSO_1_in_use]: .1.3.6.1.4.1.9.10.19.1.1.9.1.3.1.0&.1.3.6.1.4.1.9.10.19.1.1.9.1.3.1.1:co [EMAIL PROTECTED] Please let me know what’s wrong.
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
