Hi,
I am trying to monitor fibre channel ports on a McData 4700 fibre channel SAN switch on a per port basis with 4Gb/sec capability....my graphs seem to indicate a maximum of 14MB/sec which seems weird, I would expect it to show 4Gb/sec...I am assuming there is some sort of correction factor needed? I am also mystified what the MIB, v2_2SW.mib is for.... This is what I have so far, 8><------ #-- Global Config Options #----------------------------------------------------------------------- -------- LoadMIBs: /usr/share/snmp/mibs/v2_2SW.mib #LoadMIBs: /home/mrtg/misc/v2_2SW.mib WorkDir: /var/www/mrtg/san/xxx-xxx-85-181 #WorkDir: /var/www/mrtg/san/fcswitch #LogDir: /home/mrtg/log IconDir: /icons WriteExpires: Yes Refresh: 300 #----------------------------------------------------------------------- -------- #-- Global Defaults #----------------------------------------------------------------------- -------- Options[_]: noinfo, growright MaxBytes[_]: 104857600 LegendI[_]: read LegendO[_]: write Legend1[_]: read Legend2[_]: write YLegend[_]: port throughput WithPeak[_]: dwmy #----------------------------------------------------------------------- -------- Target[McData_port1]:.1.3.6.1.4.1.289.2.1.1.2.3.1.1.44.1&.1.3.6.1.4.1.28 9.2.1.1.2.3.1.1.45.1:[EMAIL PROTECTED] Title[McData_port1]: SW A Port 0 PageTop[McData_port1]: <H1>Sw A Port 0</H1> #----------------------------------------------------------------------- -------- Target[McData_port2]:.1.3.6.1.4.1.289.2.1.1.2.3.1.1.44.2&.1.3.6.1.4.1.28 9.2.1.1.2.3.1.1.45.2:[EMAIL PROTECTED] Title[McData_port2]: SW A Port 1 PageTop[McData_port2]: <H1>SW A Port 1</H1> #----------------------------------------------------------------------- -------- Etc 8><----- Is this correct? Regards Steven Jones Technical Specialist Linux/Unix/San/Vmware APG -Technology Integration Team Victoria University of Wellington Phone: +64 4 463 6272
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
