Hi - I'm in a dead end: I like to observe a BINTEC-router with mrtg. I tried this: #snmpwalk -v 3 -a MD5 -u read -A secretword -l authNoPriv 192.168.33.254 output: SNMPv2-MIB::sysDescr.0 = STRING: X2302
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.272.4.200.83.88.50.49.0.0 DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (678656500) 78 days, 13:09:25.00 SNMPv2-MIB::sysContact.0 = STRING: BINTEC SNMPv2-MIB::sysName.0 = STRING: r01.quirlum.de ....list of the sensors... o.k. - then this: # cfgmaker [EMAIL PROTECTED]:161::::3 output: SNMP V3 requires a --username parameter as part of the User Security ok. - cfgmaker know to use the protocol v3 - then this: cfgmaker --username=`read` --authpassword=`secretword` --authprotocol=`md5` 192.168.33.254:161::::3 output: nothing - no reaction... Thanks!- Uve Hayden _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
