I used --catname, and in case a port description is defined - I get a description (John Smiths ), and if not - i get a regular port name (2/12)
2008/11/20 McDonald, Dan <[EMAIL PROTECTED]>: > On Thu, 2008-11-20 at 08:44 +0100, Jakub M wrote: >> Hello in this fresh morning* >> >> I have encounterd a problem described in this post pn the list: >> https://lists.oetiker.ch/pipermail/mrtg/2003-July/024907.html >> >> I have Cat4k switch and I want cfgmaker to obtain normal interface >> names 1/1 1/2 ..., and now i have only some raw port numbers that does >> not give me any information, what chart shows what traffic. Is it >> solvable? > > Are you using --ifref=name ? > > I used to use this simple --if-template on catos - it seemed to work > fine, but I haven't run catos in years. Whilst running IOS I use a much > different. > > #catos.iftemplate > if (not $problem_lines) { > $target_lines .= <<ONEINTERFACE > Target[$target_name]: $if_ref:$router_connect > routers.cgi*ShortDesc[$target_name]: $html_if_snmp_name - $if_port_name > bb*host[$target_name]: $router_name > Directory[$target_name]: $directory_name > MaxBytes[$target_name]: $if_speed > Options[$target_name]: bits > WithPeak[$target_name]: wmy > Title[$target_name]: $html_if_snmp_name - $if_port_name > PageTop[$target_name]: <H1>$if_port_name - Traffic </H1> > ONEINTERFACE > ; > } > else { > $head_lines=""; > $problem_lines=""; > $target_lines=""; > $separator_lines=""; > } > > -- > Daniel J McDonald, CCIE #2495, CISSP #78281, CNX > Austin Energy > http://www.austinenergy.com > > > _______________________________________________ > mrtg mailing list > [email protected] > https://lists.oetiker.ch/cgi-bin/listinfo/mrtg > > _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
