I'm running mrtg-2.1 on 64 bit FC8 with perl 5.8.8. I'm trying to monitor traffic in and out of some Netgear "smart" switches (GS-something series.) It seems to work, but mrtg truncates the values. I can run the following command, for example, against the switches :
snmpget -v 2c -Cf -c Public SW208 ipInReceives.0 ipInDelivers.0 And the result is: IP-MIB::ipInReceives.0 = Counter32: 914958 IP-MIB::ipInDelivers.0 = Counter32: 914958 MRTG tops out around 7320 kb/s and stays there for all the switches, no matter what they return. Some are only reporting around 60000 (those mibs report packets?), but mrtg still reports about 7300 kb/s. The numbers are static, and the graphs are flat at the top. A sample config is below (mrtg runs in crontab). I've experimented will all the options I could find, including raising MaxBytes to ridiculously high numbers. Nothing seems to affect this. To check the snmp args, I also put snmpget in a script and had mrtg call that, with the exact same result. I hope it's something dumb I've overlooked, and any help would be greatly appreciated. WorkDir[SW208]:/pathtodir Target[SW208.switch_traffic]: ipInReceives.0&ipInDelivers.0:[EMAIL PROTECTED] title[SW208.switch_traffic]: TCP Traffic MaxBytes[SW208.switch_traffic]: 125000000 PageTop[SW208.switch_traffic]: <h1>SW208</h1> Options[SW208.switch_traffic]: growright,bits,nopercent,integer,noinfo,unknaszero,noinfo YLegend[SW208.switch_traffic]: TCP IN/OUT Legend2[SW208.switch_traffic]: TCP OUT LegendI[SW208.switch_traffic]: TCP IN LegendO[SW208.switch_traffic]: TCP OUT
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
