Ok I really feel silly asking this. Ive searched the forums and found an example cfg and tried getting cfgmaker to make me a good config. My syntax is incorrect. Could someone please help me out. My brain is melting a bit. Mrtg version 2.16.2 My example network is: 4400 switch ip =10.10.10.10 snmp community (for the monitor user) = communityexample Mrtg box (linux) is 10.10.10.20 if that matters (it doesnt appear to) I have several issues I dont understand. The switch requires a user an pass to access the community. For example the user/pass that gets that community is monitor/passformonitoruser I am unable to get it (mrtg) to pass the user/pass for the community or I am unable to understand how to format the cfg correctly. The other thing I dont understand and am have trouble searching for in the forums would be: Its a 48 port switch. I cant seem to figure out how to tell mrtg to look at several ports. (im assuming multiple configs) but how do I identify say port 1,25,10,11,12 in the configs. It feels to me like i need to set that up on the switch. Ie system/manage/snmp/set but I may be barking up the wrong tree. I may just have to tell mrtg to look at the switch and it will get the ports. Could someone help me with the config and also wouldnt I need to set up something (aside from snmp and the user/pass/community on the switch?) Thank you very much in advance. dex
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
