My apologies if i am wrong.........But the MRTG documentation mentions like this " Note that unless you are using rrdtool you can not set Interval to less than 5 minutes. If you are using rrdtool you can set interval in the format Interval: MM[:SS]" So i went according to that Regards Venkat
--- On Mon, 1/12/09, Steve Shipway <[email protected]> wrote: From: Steve Shipway <[email protected]> Subject: Re: [mrtg] Polling interval To: "'Zwart, Gerard'" <[email protected]>, "'[email protected]'" <[email protected]> Date: Monday, January 12, 2009, 3:02 AM Yes. Native mode MRTG can have ‘Interval:1’ to specify a 1-minute interval. The default for MRTG is 5minutes. If you use RRDtool as your logformat, then you can have an interval as low as 1sec with ‘Interval: 00:01’ (provided you have MRTG 2.16 or later) but of course you have to complete your polling cycle in the time interval so don’t make it too short. Note that, although you might be collecting the data more frequently, you will need to find some way to display it yourself as the normal MRTG will only generate ‘daily’,’weekly’,’monthly’,’yearly’ graphs, which corresponds to about 1pixel per 5min. The routers2 frontend for MRTG/RRD will also generate 6hr graphs (for people with a 1min interval). Smaller interval swill require you to make your own arrangements. Steve From: [email protected] [mailto:[email protected]] On Behalf Of Zwart, Gerard Is it possible to change the polling interval lower then 15 minutes? _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
