Are you polling v2? v2 uses 64 bit counters, versus 32 bit v1, which isn't enough for anything over like 600Mbps (I don't recall the actual rollover point). ________________________________ From: [email protected] [[email protected]] On Behalf Of Patrick Topping [[email protected]] Sent: Friday, January 30, 2009 12:33 PM To: '[email protected]' Subject: [mrtg] MRTG vs. Cricket
I am hoping someone can help me out with this issue I am having..... I am working on migrating from Cricket to MRTG. So far so good except that the Cricket graphs are pretty spot on for a 5 minute interval while the MRTG graphs are anywhere from 600 Mbps to 1 Gbps off at peak time. For example, I have a 10-gig circuit that runs roughly at 7 Gbps a peak time. Cricket graphs it damn near spot on. MRTG is off by almost a full gig. I have checked the cron jobs and both services are running every 5 minutes. They are synced to NTP and the clocks are not off so they are both seeing the exact same data. I have set up my CFG files to use the 64 bit counters. I have Googled for answers but not a lot out there on this topic. I am hoping this is something small I have missed and can easily be fixed. Any ideas? Thanks in advance. -Patrick _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
