At my workplace we have some HP/Nortel GbE2c blade switches. I can run mrtg cfgmaker against them and while cfgmaker can see the ports, unfortunately the description data that has been configured into the Blade switches for each port is unable to be captured by cfgmaker. So I am wondering do I need to configure some MIBs somehow for these switches.
Could you confirm if I am on the right track thanks. If so, do I need to configure the MIBs in the target switches themselves, or in the mrtg server (or both target and mrtg)? Any help appreciated Derek ********************************************************************** This email is intended for the use of the addressee only. If you receive this email in error, please delete it immediately. This email may contain information which is confidential and/or legally privileged. You must not use or disclose the contents of this email, or add the sender's email address to any database, list or mailing list unless you are expressly authorised to do so. The statements or views expressed in this email are those of the individual sender and are not those of Australian Associated Press Pty Ltd (AAP). These statements are not binding on AAP, except where the sender expressly and with authority, states them to be. AAP is unable to review the contents of all the email on its system. To the extent permitted by law, AAP disclaims all liability for any loss or damage caused by the contents of this email. www.aap.com.au **********************************************************************
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
