Hi, I want to plot CRCs on Cisco Router's interfaces, for that i make a cfg file as below:
***************************************************************** cfg file snap ************************************ WorkDir: C:\Inetpub\wwwroot\mrtg\ HtmlDir: C:\Inetpub\wwwroot\mrtg\ ImageDir: C:\Inetpub\wwwroot\mrtg\ LogDir: C:\Inetpub\wwwroot\mrtg\ Icondir: C:\Inetpub\wwwroot\mrtg\ Refresh: 300 RunAsDaemon: Yes Interval: 5 Options[_]: gauge Target[crc1]: 1.3.6.1.2.1.16.1.1.1.5.14:[email protected].<1.3.6.1.2.1.16.1.1.1.5.14%[email protected].> .1 MaxBytes[crc1]: 1000 Title[crc1]: CRC on first interface PageTop[crc1]: <h1>CRCs on Router1's interfaces</h1> *****************************************************************end ************************************************* where 14 at the ned of OID is the ifindex of interface of 10.0.0.1. But the following error is generating when i run the below command C:\mrtg\bin>perl mrtg C:\Inetpub\wwwroot\mrtg\CRC.cfg Daemonizing MRTG ... Do Not close this window. Or MRTG will die 2009-03-16 16:39:20: ERROR: Target[crc1][_IN_] '1.3.6.1.2.1.16.1.1.1.5. $target->[0]{$mode} ' evaluated to '☺♥♠☺☻☺►☺☺☺♣2458401775' instead of a number 2009-03-16 16:39:20: ERROR: Target[crc1][_OUT_] '1.3.6.1.2.1.16.1.1.1.5. $target->[0]{$mode} ' evaluated to '☺♥♠☺☻☺►☺☺☺♣4218328121' instead of a numbe r This seems that it is plotting in/out stats of interface rather CRCs. Any idea? Thanks -FJ
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
