Hi all,
I am polling some Liebert UPS units and have created a script to poll
the 3 necessary OID's then produce a total (total AMP draw) however I
cannot figure out how to make the MRTG .cfg file work. I keep getting a
*.cfg_l file but not sure what the problem is. Can someone assist?
##Script##
#!/bin/ksh
IPS="10.10.180.45 10.10.180.46"
OIDS="1.3.6.1.4.1.476.1.42.3.5.2.3.1.6.3.1 \
1.3.6.1.4.1.476.1.42.3.5.2.3.1.6.3.2 \
1.3.6.1.4.1.476.1.42.3.5.2.3.1.6.3.3"
TOTAL=0
for IP in $IPS; do
for OID in $OIDS; do
OUT=`snmpwalk -v1 -c hermes $IP .$OID`
INC=`echo $OUT |awk '{FS=":"}{print $4}'`
TOTAL=`expr $TOTAL + $INC`
done
done
echo $TOTAL
##Here is the MRTG config file which doesn't work##
Target[mo22_lieberts]: `/usr/local/mrtg-2/bin/mo22_lieberts.sh`
MaxBytes[mo22_lieberts]: 3000
Options[mo22_lieberts]: growright, gauge, perminute, nobanner,
withzeroes, nolegend
YLegend[mo22_lieberts]: Amps
ShortLegend[mo22_lieberts]: amps
WithPeak[mo22_lieberts]: ymwd
LegendI[mo22_lieberts]: Lieberts
LegendO[mo22_lieberts]:
Title[mo22_lieberts]: Power Draw
PageTop[mo22_lieberts]: <h1>Power Draw</h1>
Colours[mo22_lieberts]: GREEN#006666,BLUE#009933,DARK
GREEN#000033,VIOLET#33006
Thanks in advance!
Frank
This communication, including attachments, is for the exclusive use of
addressee and
may contain proprietary, confidential and/or privileged information. If you are
not
the intended recipient, any use, copying, disclosure, dissemination or
distribution
is strictly prohibited. If you are not the intended recipient, please notify
the sender
immediately by return e-mail, delete this communication and destroy all copies.
_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
