You changed it in the pix, but did you tell MRTG to use the correct string ---- To have principles... First have courage.. With principles comes integrity!!!
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Kevin Wong Sent: Friday, April 24, 2009 15:58 To: [email protected] Subject: Re: [mrtg] Can't create cfg file on Cisco Pix 515 Thanks for the advise. And yes, I have to enable polling on the pix. It worked. However, I get this error when I run it. Why is it "public" being used as the community name even I change it? Error: can't resolve "mrtg.cfg" to IP address at C:/mrtg-2.16.2/bin\..\lib\mrtg2/SNMP_util.pm line 428 SNMPWALK Problem for [email protected]::::::v4only at cfgmaker line 950 WARNING: Skipping [email protected]: as no info could be retrieved -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of McDonald, Dan Sent: Friday, April 24, 2009 2:01 PM To: [email protected] Subject: Re: [mrtg] Can't create cfg file on Cisco Pix 515 On Fri, 2009-04-24 at 13:22 -0400, Kevin Wong wrote: > Hi, > I am experiencing an issue trying to create the cfg file. See below > error below. Can someone point me in the right direction to get this > resolved? snmp has to be explicitly enabled per polling device on the pix. The syntax changed between version 6.2 and 6.3 and 7.0 (yes, 3 different, incompatible sets of syntax) so allowing "polling" from a particular host is left as an exercise for the reader... -- Daniel J McDonald, CCIE #2495, CISSP #78281, CNX Austin Energy http://www.austinenergy.com _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
