Stokkenes Vidar wrote: > Hello guys, > > I'm trying to graph both temperature and humidity to the same graph by using > MRTG. However, when I do it as advised in your documentation, I only see the > temperature (first OID in the "& chain") and not the second one (which is > humidity) > > Here is my config for the particular probe: > > Target[probe1]:1.3.6.1.4.1.3854.1.2.2.1.16.1.3.0&1.3.6.1.4.1.3854.1.2.2.1.17.1.3.0:[email protected] > Title[probe1]: Soyle Generell Temp > Options[probe1]: nopercent,gauge,noinfo,nolegend,noo,growright > PageTop[probe1]: <H1>Probe 1</H1> > Ylegend[probe1]: Temperature in Celsius > LegendI[probe1]: Temperature: > ShortLegend[probe1]: 'C > MaxBytes[probe1]: 100 > XSize[probe1]: 500 > YSize[probe1]: 175 > YTics[probe1]: 5 > #Colours[probe1]: BLUE#61A7E2, BLUE#6188E2, BLUE#6268E2, BLUE#7B61E2 > > Why am I only seeing the first OID (1.3.6.1.4.1.3854.1.2.2.1.16.1.3.0) and > not the second one (1.3.6.1.4.1.3854.1.2.2.1.17.1.3.0)?
Delete the "noo" in your options line. That is "no out" and suppresses display of the second variable. -- Jay Hennigan - CCIE #7880 - Network Engineering - [email protected] Impulse Internet Service - http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
