Thanks every one for reply, Here are the definition of the cfgmaker and have a look over it ... for security reasons I am running it over private addressing ;) so if any one for the snmp string cant do any thing.
/usr/bin/cfgmaker --no-down --global 'WorkDir: /srv/www/lighttpd/mrtg/' --global 'Options[_]: growright,bits' [email protected]=:::::2 Kindest Regards TheONe Kan On Mon, Jun 22, 2009 at 3:55 AM, Steve Shipway <[email protected]>wrote: > With a 5-min interval and 32bit counters, you get rollover at about > 110Mbits/s and the graphs go wrong. > > So, with a 1-min interval and 32bit counters, this would be at 550Mbps. > > > > Hmm, suspiciously similar! > > > > I suspect you are using 32bit counters, even if you think you aren’t. Make > sure you have :::::2 at the end of the Target definition. Post the Target > definition here (obfuscate the SNMP community of course) if you still can’t > solve it so people can take a look. > > > > Steve > > > ------------------------------ > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *tvtube blog > > I Am facing a strange problem, As I have attached a png file of my WAN GIGA > Interface of my Zyxel Router, Problem is that when ever our Internet > Bandwidth cross over 555 Mbits/s MRTG creates False Graphs, but on real time > monitoring Show more then 600 Mbits/s of data flowing normally thought it, I > am using SNMP v2 to create MRTG , also have applied 1min MRTG patch to > create MRTG. I have CHeck router cpu and memory and other Interfaces are > working normally and there MRTG matched the real time flow. > > > >
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
