On Tue, 2009-08-18 at 12:03 -0500, vishh_champ wrote: > Hello everyone, > > I came to know about MRTG that it monitors SNMP network devices and also > MRTG is being used to graph all sorts of network devices > > Since i havent used it before so I m not aware about its features.So i want > to know the following: > > Can this software/tool be used for getting statistics/ reports/ graphs for > the ACE Module ( Used with the Cisco 6500 series Switch).
Yes, but it takes a bit of work to get what you want. I have published a template on http://steveshipway.org/forum/viewtopic.php?f=34&t=1621, but it still needs some work. You also need to set up snmp v3 properly to get the multi-context information from it. > If YES then What Stats/information/reports/graphs it can provide for the ACE > Module. The mibs are pretty rich, if a bit complex. if there is something in particular that you are looking for that my template doesn't show, post here and I might take a shot at extending my script. my time is pretty limited, so don't expect a fast turnaround. > > Can this software/tool can provide efficient analysis for FWSM Depends what you are looking for. Traffic graphs on an FWSM are mostly pointless, because that's not the constrained entity. Again I have a template posted in the same forum on Steve's site. Note that the FWSM only supports snmp v1 (up to version 3.0) and snmp v2c (3.1 and 4.0). I don't run multi-context, so I'm not certain what that would do. > > Thank You - Vishal > _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
