Hi,
I have a modem-router(Huawei E960) which sets up the IP addresses dynamically.
A pc that boots up first gets 192.168.1.100 and second gets x.x.x.101 and so
on. i only know how to setup monitoring network traffic by using the ip address
of the pc at the time of the configuration. that works fine till the rest of
the day but makes an issue after shut down and the bootup order of the Pcs is
changed. Basically it doesnt graph any traffic after the ip address is changed.
i searched mrtg mail achieves a lot yesterday. only found 2 possible solutions
but i am not sure neither of them. thats why i am asking for your help. one of
the solutions was reseting the registry of 'ip address lease after shutdown'.
my initial thought was assigning one ip address to a computer indefinitely
might create some problems later on. i might be wrong. if this is a good
solution, i would like to know the reasons. the second solution was a dhcp
script for mrtg by Eric Garnel. i didnt quite understand how to modify the code
and its pretty old message (way back in 2003).
I really would like to get this MRTG working. Any assist that will help me to
achieve that would be appreciated.
Cheers
Becky
_________________________________________________________________
Get Hotmail on your iPhone Find out how here
http://windowslive.ninemsn.com.au/article.aspx?id=845706
_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
