Turned out to require a little of both to fix the issue also have to update to OS on the nexus 5010.
Thanks for getting back. -----Original Message----- From: Steve Shipway [mailto:[email protected]] Sent: Wednesday, January 06, 2010 3:44 PM To: Mersberger, Robert; [email protected] Subject: RE: Problem with Bandwidth on nexus 5010 switch > > The configuration below is from chgmaker run against a Nexus 5010 > switch where all interfaces should be 10Gb > ... > > Target[nexus1bottom_Ethernet1_1]: > #Ethernet1/1:da...@nexus1bottom:::::1 If you have 10Gbps interfaces then you should use SNMPv2; this is using SNMPv1. Add the option --snmp-options=:::::2 as your first option to cfgmaker, and make sure SNMPv2 is enabled on the device. Another possibility is that the device is reporting an incorrect speed for the interfaces in which case you'll need to fix it manually in the config files. Steve Please consider the environment before printing this e-mail. CONFIDENTIAL NOTICE: This e-mail message and any attachment(s) (collectively, this 'Email') are intended only for the confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient named above or an agent responsible for delivering it to the intended recipient named above, you have received this Email in error. Please notify the sender immediately and permanently delete this Email and any copies thereof. _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
