ashok kumar wrote:
Hi folks,
I have been working with MRTG for two months. Today I came up with an
idea to monitor my system using MRTG ( just because of curiosity). But
when I run the cfgmaker it's giving a cfg file with no target.
This is my cfg file.
# Created by
# /usr/bin/cfgmaker --global 'WorkDir: /home/Ashok/mrtg2/Temp'
--global 'Options[_]: bits,growright' --output
/home/Ashok/mrtg2/cfg/temp.cfg [email protected]
<mailto:[email protected]>
### Global Config Options
# for UNIX
# WorkDir: /home/http/mrtg
# or for NT
# WorkDir: c:\mrtgdata
### Global Defaults
# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits
EnableIPv6: no
WorkDir: /home/Ashok/mrtg2/Temp
Options[_]: bits,growright
######################################################################
# System: Station130
# Description: Linux station130 2.6.9-5.ELsmp #1 SMP Wed Jan 5
19:30:39 EST 2005 i686
# Contact: Root <r...@localhost> (configure /etc/snmp/snmp.local.conf)
# Location: Unknown
######################################################################
I missed the target here.
Please help me.
Thanks
G. Ashok Kumar,
Softential.
------------------------------------------------------------------------
_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
This host has to be running the SNMP daemon and it's configuration needs
to allow the MRTG host to poll it. On SuSE, the default is to allow
only localhost talk to snmpd. And don't forget iptables if you are
running that on this workstation.
Lyle Giese
LCR Computer Services, Inc.
_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
