Hi Ve2cii,
Yesterday [email protected] wrote:
> Its caused by the 32 bit counters wrapping too quickly for the sample to make
> sense of it.
>
> Kent
> Sent from my BlackBerry® wireless device
>
> -----Original Message-----
> From: [email protected]
> Date: Thu, 6 May 2010 16:19:59
> To: <[email protected]>
> Subject: [mrtg] mrtg incorrect data when over 100MB
>
> Hi Everyone,
>
> I am probing a cisco 3500 and a number of windows machines. When the
> traffic goes over 150MB via the 3500 to one of the machines I start getting
> incorrect data from the 3500. I thought the problem was the 3500 and was
> about to replace it but then the problem occured in another 3500 as well
> as one of the machines. I decreased the probe time (cron job) from 5 minutes
> to 3 minutes and that fixed the problem until the traffic went over 250MB.
> I am also logging the mrtg so I can send logs if need be.
> Any ideas???
use snmpv2 by specifying :::::2 after the target name ... see
mrtg-referenc
cheers
tobi
>
>
> -
> sysadm cronomagic.com
> e-mail [email protected]
>
> POWERED BY LINUX
>
> _______________________________________________
> mrtg mailing list
> [email protected]
> https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
> _______________________________________________
> mrtg mailing list
> [email protected]
> https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
>
>
--
Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten, Switzerland
http://it.oetiker.ch [email protected] ++41 62 775 9902 / sb: -9900
_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
