At 04:23 PM 6/11/2010, Stuart Henderson wrote: >On 2010-06-11, Ed LaFrance <[email protected]> wrote: > > Hello - > > > > I'm having fits trying to get mrtg 2.15.0 to run against my > > linux-based router using mrtg v3. I can poll the router using v1 with > > no problem, but in v3 I get no joy. The router OS does support v3. > >This is more than three years old and there have been 7 releases in >the meantime. > >Why not try a newer MRTG and see if it's been fixed already?
Hello Stuart - I went ahead and installed the latest MRTG. I call cfgmaker as follows: /usr/local/mrtg-2.16.4/bin/cfgmaker --global 'Workdir: /path/to/workdir' --global 'Options[_]: bits, growright' --ifref=descr --output /path/to/output.cfg --enablesnmpv3 --username=<username> --authprotocol=MD5 --authpassword=<authpass> --privprotocol=des --privpassword=<privpass> --contextengineid=0x0102030405 --contextname=default --snmp-options=:::::3 <target.ip> ... and I get SNMPWALK Problem for 1.3.6.1.2.1.1 on public@<target.ip>:::::3:v4only: No response from remote host "r.va.0" at /usr/local/mrtg-2.16.4/bin/../lib/mrtg2/Net_SNMP_util.pm line 1805 Yes I can do a v3 query fine with snmpwalk: snmpwalk -u public -v 3 -a MD5 -A <authpwd> -l authPriv -x DES -X <privpass> <router.ip> Any ideas? Ed _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
