I'm having a similar issue. Trying to graph 10Gig and GigE links. Getting some nice graphs and all, but they never go over 120M even though the one link in question was maxing out at 1 Gig when looking at the manufacturers management software.
Used the following: cfgmaker --global 'WorkDir: /var/www/mrtg' --output /etc/mrtg/mrtg.cfg pub...@localhost Steve Fetcie SUNY Canton Canton, NY -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tobias Oetiker Sent: Saturday, July 17, 2010 1:28 AM To: Roger Ham Cc: [email protected] Subject: Re: [mrtg] graph over 120MB Hi Roger, note that the options act only when called BEFORE the target ... put the comun...@ip bit last tobi Yesterday Roger Ham wrote: > Hello all > > I need to do a grahp to a cmts over 120MB on the Wan interface, but the mrtg > no do it, my cfgmaker: > > cfgmaker [email protected] --global Workdir:/var/www/html/cmts/ --output > cmts.cfg --snmp-options=:::::2 > > thanks and sorry for my bad English > > > -- Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten, Switzerland http://it.oetiker.ch [email protected] ++41 62 775 9902 / sb: -9900 _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
