Our running copy of MRTG (2.12.2) doesn't have rrdtool or routers2 (AFAIK). Q1: Could I install rrdtool and routers2 as I would normally and then just run the new MRTG executables from a user dir? Q2: Would adding RRDTool and Routers2 mess up the working MRTG 2.12.2?
>This should be possible; however, you may need to > >1) Change the routers2.conf to reflect the newlocations > of the files, possibly also adding a LibAdd for the RRDTool > perl librayr location > >2) Maybe change/add a LibAdd: to the MRTG configuration > file to specify new RRDTool library location > >3) If you have the MRTG and/or RRDTool libraries > installed into the site_perl location you will certainly > need ot be very careful about adding the required LibAdd > definitions > >4) If moving routers2, don’t forget that you will also > need copy the rrdicons directory and re-create the graphs > directory under your docroot with the appropriate > permissions > >We have separate installations of 3 versions of MRTG and 4 > versions of RRDTool (and also 4 versions of Routers2) on > our dev box here, so it can work, although as I mentioned > you need to be very careful you’re getting the right Perl > libraries. =================== Texas Transportation Forum www.texastransportationforum.com
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
