hi to all.
we have many windows 2003 servers with snmp informant installed (easier to
get OID on win:), we are monitoring cpu, mem, disk, and all the rest with
success.
recently i noticed that every time the gigabit network interfaces of the
servers reach the full usage speed, i found on the log of my mrtg server the
message:
"2009-07-17 17:41:05 -- 2009-07-17 17:41:02: ERROR:
Target[procos11.lan1][_IN_] ' $target->[38]{$mode} ' did not eval into
defined data"that means to me that if mrtg (that, for info, is a w2k server) read a very high value it display this error. during low network traffic i can see the correct graphs... i used snmpwalk to check snmp v1 and v2 those servers and it respond successfully, so i tryed without success to add ":::::2" code to mrtg config file for those server oid interfaces, it does not work anyway. so i am basically stuck...if the network card goes faster that 100Mb/sec, it does not record the data, if i switch mrtg to snmp 2c with ":::::2" it gives me this error "2009-07-17 17:50:56 -- SNMP Error: Received SNMP response with error code error status: genErr index 2 (OID: 1.3.6.1.4.1.9600.1.1.3.1.3.53.66.114.111.97.100.99.111.109.32.66.67.77.53.55.48.56.83.32.78.101.116.88.116.114.101.109.101.32.73.73.32.71.105.103.69.32.91.78.68.73.83.32.86.66.68.32.67.108.105.101.110.116.93) SNMPv1_Session (remote host: "10.0.0.11" [10.0.0.11].161) community: "snmp4procos" request ID: 487209239 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) at c:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 492 " can someone give me a clue? thx! -- View this message in context: http://n2.nabble.com/windows-2k3%2C-snmp-informant%2C-snmp-2c%2C-data-not-eval-error-tp3276465p3276465.html Sent from the MRTG Users Mailinglist mailing list archive at Nabble.com. _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
