On Saturday 13 November 2010 13:01:20 callesen wrote: > Does anybody know how to active SNMP i a Netgear VVG2000 router. > I get this when i try to get MRTG installed > C:\mrtg-2.16.4\bin>perl cfgmaker [email protected] --global "WorkDir: > c:\www\ > mrtg" --output mrtg.cfg > SNMP Error: > no response received > SNMPv1_Session (remote host: "95.166.72.182" [95.166.72.182].161) > community: "public" > request ID: -791239861 > PDU bufsize: 8000 bytes > timeout: 2s > retries: 5 > backoff: 1) > at C:/mrtg-2.16.4/bin\..\lib\mrtg2/SNMP_util.pm line 629 > SNMPWALK Problem for 1.3.6.1.2.1.1 on [email protected]::::::v4only > at cfgmaker line 955 > WARNING: Skipping [email protected]: as no info could be retrieved
I don't have that router, but small Netgear routers (DG834 series) respond to this: http://95.166.72.182/setup.cgi?next_file=snmp.htm or if you have telnet access: snmpd br0 nas0 I recall having to delete a particular firewall rule with e.g.: iptables -D INPUT 1 where 1 was the firewall rule I had to delete to allow access to SNMP. Have look at the list of rules by: iptables -L INPUT --line-numbers HTH. -- Regards, Mick
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
