It kind of feels like your interface names (gi1/0/3) may have changed. I'm not too familiar with the cisco 12000 routers, but is it possible that the card has been moved to another slot and is now gi2/0/3 or something like that? Rerun cfgmaker against the device and see if that fixes your issue. You could also execute: "snmpwalk -v2c -c EeSPnOok c12k-Borde interfaces" and see what that lists for all the interfaces. In particular, look for valid interface-mib values for the instance numbers that match gi1/0/3 and po0/1/2.
If you are not the intended recipient of this message (including attachments), or if you have received this message in error, immediately notify us and delete it and any attachments. If you no longer wish to receive e-mail from Edward Jones, please send this request to [email protected]. You must include the e-mail address that you wish not to receive e-mail communications. For important additional information related to this e-mail, visit www.edwardjones.com/US_email_disclosure ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Ivan Palacios Sent: Friday, March 11, 2011 4:33 PM To: [email protected] Subject: [mrtg] please help I have problem to monitor STM1 mrtg.root:/usr/local/mrtg-2/bin/config# /usr/local/mrtg-2/bin/mrtg /usr/local/mrtg-2/bin/config/c12k-Borde.cfg 2011-03-11 16:25:17: WARNING: Can not determine ifNumber for EeSPnOok@c12k-Borde:::::2 ref: 'Name' key: 'Gi1/0/3' 2011-03-11 16:25:17: WARNING: Can not determine ifNumber for EeSPnOok@c12k-Borde:::::2 ref: 'Name' key: 'PO0/1/2' 2011-03-11 16:25:22: ERROR: Target[c12k-borde_gi1_0_3][_IN_] ' $target->[3]{$mode} ' did not eval into defined data 2011-03-11 16:25:22: ERROR: Target[c12k-borde_gi1_0_3][_OUT_] ' $target->[3]{$mode} ' did not eval into defined data 2011-03-11 16:25:22: ERROR: Target[c12k-borde_po0_1_2][_IN_] ' $target->[5]{$mode} ' did not eval into defined data 2011-03-11 16:25:22: ERROR: Target[c12k-borde_po0_1_2][_OUT_] ' $target->[5]{$mode} ' did not eval into defined data Target[c12k-Borde_Gi1_0_3]: #Gi1/0/3:EeSPnOok@c12k-Borde:::::2 SetEnv[c12k-Borde_Gi1_0_3]: MRTG_INT_IP="190.212.134.10" MRTG_INT_DESCR="GigabitEthernet1/0/3" Directory[c12k-Borde_Gi1_0_3]: c12k-Borde MaxBytes[c12k-Borde_Gi1_0_3]: 125000000 Title[c12k-Borde_Gi1_0_3]: GigabitEthernet1/0/3 ENITEL - BackUp IP 155Mbps -- C12K-Borde PageTop[c12k-Borde_Gi1_0_3]: <h1>GigabitEthernet1/0/3 155Mbps -- </h1>
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
