hello, made some progress by just skipping the vmVlan walking / reading for certain types of cisco routers. only it still doesn't quite work, im wondering if there is a list of MIBs to allow on a cisco device (if you don't grant full access) to have basic mrtg working (so just to create a working config by cfgmaker)?
thanks, bart On Tue, Feb 15, 2011 at 9:53 AM, bart sikkes <[email protected]> wrote: > hello, > > I have been using mrtg without problems for a long time but recently > encountered some problems with routers from a new WAN provider. during > cfgmaker it fails on the vmVlan walking > > --base: Walking vmVlan > SNMP Error: > Received SNMP response with error code > error status: noSuchName > index 1 (OID: 1.3.6.1.4.1.9.9.68.1.2.2.1.2) > SNMPv1_Session (remote host: "154.169.0.89" [154.169.0.89].161) > community: "test" > request ID: -591419100 > PDU bufsize: 8000 bytes > timeout: 2s > retries: 5 > backoff: 1) > at /usr/bin/../lib/mrtg2/SNMP_util.pm line 627 > SNMPWALK Problem for 1.3.6.1.4.1.9.9.68.1.2.2.1.2 on > [email protected]::::::v4only > at /usr/bin/cfgmaker line 150 > > this happens for the FastEthernet0/0 interface and because of the > error it is commented out in the final config. the interface is up and > traffic flows through it. > > I tried snmpwalking the device myself and that seems to work fine, so > community string is ok and device does allow some polling. > > this is a Cisco 1841 router, IOS version Version 12.4(25d), exact SNMP > settings are unknown, as it is a provider managed device. > > any clue where to look for the issue? mrtg setting, device setting? > > thanks in advance, > bart > _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
