>For example, If I have 2 targets "IN" and "OUT" I want to display both lines >on the graph but suppress ANY and ALL Legends for the "OUT" Target. >I tried just having the Directives there for both but leaving the one's blank >for the OUT target but it removed the line from the graph as well...
If using Routers2 for your frontend, you need to have the directive routers.cgi*Options[xxxx]: nodetails This will suppress the various legend parts. On a userdefined graph, it will suppress all legends apart from the Total and Average lines, if enabled. You can also use 'nolegend' for no legend at all, and 'nolines' to suppress the component lines in a userdefined graph. In both normal Targets and userdefined graphs, if the relevant Legend (Legend1, Legend2 etc) is blank, then this will also suppress the legend for that particular variable. You can also use this method to suppress legends in standard native-mode MRTG. Steve Steve Shipway University of Auckland ITS UNIX Systems Design Lead [email protected]<mailto:[email protected]> Ph: +64 9 373 7599 ext 86487
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
