Hey Lee, I am by no means an expert on the subject, but from personal experience it looks like the OID your giving it is incorrect. Or your using the wrong SNMP version. Are you just trying to collect Traffic data from your router...?
Also, do you have the ability to run an "snmpget" request from a command line? -Matt From: Lee Todd <[email protected]> To: <[email protected]> Date: 01/17/2012 10:52 AM Subject: [mrtg] pulling snr data error Sent by: <[email protected]> I have been trying to pull snr data from a cisco 887 router. I got a base cfg from the web and changed what I think is correct but when I run it I get the following error. Prob a really silly thing but im just not seeing it. env LANG=C /usr/bin/mrtg /etc/mrtg/test.cfg SNMP Error: Received SNMP response with error code error status: noSuchName index 1 (OID: 1.3.6.1.2.1.2.2.1.10.12) SNMPv1_Session (remote host: "172.20.129.2" [172.20.129.2].161) community: "test" request ID: 762442628 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) at /usr/bin/../lib/mrtg2/SNMP_util.pm line 490 SNMPGET Problem for ifInOctets.12 ifOutOctets.12 sysUptime sysName on [email protected]::::::v4only at /usr/bin/mrtg line 2202 2012-01-17 15:40:15: ERROR: Target[gauge32][_IN_] '.1.3.6.1.2.1.10. 94.1.1.3.1.4.12&.1.3.6.1.2.1.10.94.1.1.2.1.4. $target->[0]{$mode} ' (kill): Unrecognized character \xC2 at (eval 19) line 1. 2012-01-17 15:40:15: ERROR: Target[gauge32][_OUT_] '.1.3.6.1.2.1.10. 94.1.1.3.1.4.12&.1.3.6.1.2.1.10.94.1.1.2.1.4. $target->[0]{$mode} ' (kill): Unrecognized character \xC2 at (eval 20) line 1. The cfg is below. I first thought it was the name in the [ ] so tried guage32 and before that it was Cisco-snr EnableIPv6: no workdir:/var/www/mrtg/test options[_]: growright,bits XSize[_]: 500 YSize[_]: 100 Target[Gauge32]:.1.3.6.1.2.1.10. 94.1.1.3.1.4.12&.1.3.6.1.2.1.10.94.1.1.2.1.4.12:[email protected] Title[Gauge32]: Cisco 887 SNR Analysis PNGTitle[Gauge32]: Cisco 887 SNR Analysis Background[Gauge32]: #ffffff PageTop[Gauge32]: <H1>Cisco 887 SNR Analysis</H1> WithPeak[Gauge32]: wmy MaxBytes[Gauge32]: 200000 Options[Gauge32]: gauge, nopercent YLegend[Gauge32]: SNR Value ShortLegend[Gauge32]: dB Legend1[Gauge32]: Average Legend2[Gauge32]: Legend3[Gauge32]: Maximum Legend4[Gauge32]: LegendI[Gauge32]: Local SNR: LegendO[Gauge32]: Remote SNR: Registered Office: Bingley Road, Bradford, BD9 6SD Registered in England no. 03414540 The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. Unless specifically stated in this e mail, the agreement and content of this correspondence is subject to contract. No contract is implied by this correspondence, unless specifically stated as a contract (purchase order or sales order) Think of the environment; please don't print this e-mail unless you really need to _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
