Hey everyone,
Looks like in fixing one problem, I've introduced another. The following tunnel
interface is indicating that it is updating the graphs but the data is not
showing on the graph:
System: AC5-RID-RTR-02 in Germantown NOC
Description: Tu0 Connected to RITE AID HQ
ifType: ethernetCsmacd (6)
ifName: Tu0
Max Speed: 50 Mbits/s
Ip: 10.254.32.5 ()
The statistics were last updated Tuesday, 30 December 2014 at 14:35
Max Average Current
In 0.0 b/s (0.0%) 0.0 b/s (0.0%) 0.0 b/s (0.0%)
Out 0.0 b/s (0.0%) 0.0 b/s (0.0%) 0.0 b/s (0.0%)
>From the router:
Tunnel0 is up, line protocol is up
Hardware is Tunnel
Description: VPN Tunnel To Rite Aid HQ
Internet address is 10.254.32.5/30
MTU 17916 bytes, BW 100 Kbit/sec, DLY 50000 usec,
reliability 255/255, txload 255/255, rxload 255/255
Encapsulation TUNNEL, loopback not set
Keepalive set (1 sec), retries 10
Tunnel source 69.35.59.42, destination 204.28.140.117
Tunnel protocol/transport GRE/IP
Key disabled, sequencing disabled
Checksumming of packets disabled
Tunnel TTL 255, Fast tunneling enabled
Tunnel transport MTU 1476 bytes
Tunnel transmit bandwidth 50000 (kbps)
Tunnel receive bandwidth 50000 (kbps)
Last input 00:00:20, output 00:00:00, output hang never
Last clearing of "show interface" counters 03:44:38
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 1560442
Queueing strategy: fifo
Output queue: 0/0 (size/max)
30 second input rate 3514000 bits/sec, 1576 packets/sec
30 second output rate 3922000 bits/sec, 1677 packets/sec
25452326 packets input, 9399327018 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
26710278 packets output, 6849102549 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 output buffer failures, 0 output buffers swapped out
Any advice will be greatly appreciated!
Thanks,
Mohammad Hassan
From: Courtney, Wrolf [mailto:[email protected]]
Sent: Tuesday, December 30, 2014 11:19 AM
To: Mohammad Hassan; [email protected]
Subject: RE: MRTG Graphs not Refreshing
Try running "LANG=C mrtg yourfile.cfg", see if you get any errors. Check your
WorkDir in those .cfg files. Make sure your .png and .html files have new
timestamps. Check that your index.html files point to the right directory - you
can rerun indexmaker using the command line in the index.html.
Wrolf
From: mrtg [mailto:[email protected]] On
Behalf Of Mohammad Hassan
Sent: Tuesday, December 30, 2014 11:14 AM
To: [email protected]<mailto:[email protected]>
Subject: [mrtg] MRTG Graphs not Refreshing
Hi all,
I just joined this community! Been troubleshooting this issue for a few days
now and needed some professional help. Thanks in advance, to any suggesting you
guys may provide!
A Linux server was configured for MRTG using cfgmaker more than a year ago. It
continued to work as desired until earlier year.
There are some graphs being polled from a router that are not updating. The
last refresh date for each graph that is not refreshing is unique and within
the last few months. The strange is, there are graphs that are not updating and
those that are updating from the same router.
Please see the following:
Actions taken:
* Restart crond, httpd and snmp services
* Reload the Linux server
o Strange thing happened here: Those graphs that have been static and not
updating remained on the http page, those that were still dynamically updating
were not showing anything until crond and httpd was restared.
Any help would be much appreciated!!
Update: Graphs are updating now but the "Daily Graph," others are remaining
static. Also, the last update date has not updated.
Thanks,
Mohammad Hassan
_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
