On Thursday 17 May 2018 20:23:05 code dz wrote: > > 1 create new project > 2 create a unit in the same prj folder , add a type or const or var.. into > it 3 ctrl+lclick on the type or const but in the main program ( this > should let the source editor open the desired unit ) > > 4 close the project > 5 copy the folder of the project and paste it into another place > 6 open the copied prj and Ctrl+lclick in the main program into the > const or type > > the source will then open the same unit but in a new tab
Please check the paths of the "unit1.pas" files by clicking on it and check the path display at the bottom of the source window, they should be different. The opened files are stored as absolute paths and relative to the project directory in *.prj file. At loading of *.prj MSEide first tries to load the absolute path, if it does not exist it tries to load the file in project directory relative path. If you copy a *.prj to another directory the first step which must be done after loading the *.prj into MSEide in the new directory is 'File'-'Close all' in order to close all files of the old project directory. Martin ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ mseide-msegui-talk mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mseide-msegui-talk
