Kevin, I have checked the event viewer my problem is I do not think the discovery actually runs! Even if the discovery is manual or scheduled?
I can see the Cisco HSRP discovery failure for the OID/IP and the rule get unloaded but nothing else. Also nothing changes in the GUI the last run time never changes for example. Peter Hakesley | Monitoring & Automation Technical Lead Engineer, Data Centre Services t: +44(0)845 155 6556 ext: 4006 e: [email protected] | w: www.scc.com<http://www.scc.com/> a: SCC, CV1, Cole Valley, 20 Westwood Avenue, Tyseley, Birmingham B11 3RZ From: [email protected] [mailto:[email protected]] On Behalf Of Kevin Holman Sent: 20/December/2016 14:36 To: [email protected] Subject: [msmom] RE: Network Discovery Question Look at the OpsMgr event logs shortly after running the rule manually. It will log verbose logs to tell you what's going on. A single GW in a resource pool is not a valid pool configuration: https://blogs.technet.microsoft.com/kevinholman/2016/11/21/understanding-scom-resource-pools/ From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Pete Hakesley Sent: Tuesday, December 20, 2016 6:23 AM To: [email protected]<mailto:[email protected]> Subject: [msmom] Network Discovery Question Hi, I have created a Network Discovery Rule with 5 Cisco devices within using a "runas" SNMP string and a Gateway server with a Resource Pool. However, with either manual or schedule (daily at 02:00) the rule never seems to run the Last Run Time is always empty and Last discovered is 0. Does anyone know has to find out what is happening behind the Scenes so I can diagnose? SCOM 2012 R2 CU9 Peter Hakesley | Monitoring & Automation Technical Lead Engineer, Data Centre Services t: +44(0)845 155 6556 ext: 4006 e: [email protected]<mailto:[email protected]> | w: www.scc.com<http://www.scc.com/> a: SCC, CV1, Cole Valley, 20 Westwood Avenue, Tyseley, Birmingham B11 3RZ
