Hi,

mspgcc-users@lists.sourceforge.net schrieb am 17.02.03 22:52:15:
> 
> Actually, for non-volatile Flash memory, I would suggest MMC technology.
> The interface is SPI and the MSP 430 can be adapted to that very easily
> (2-wire serial write).  In fact, the 44x series has an SPI port in
> hardware.  Sandisk/s web page has all the specs you need and has a C
> library of functions that will allow MS-DOS file system.  I haven't
> gotten them to reply to me yet (about 1 week), but when they do, I'll
> let everyone know if their libraries compile under MSP-gcc.
> Sandisk.com type in mmc and then go to OEM solutions.
> -Mark 

Great. I'm working on a project with a MMC connected to an MSP430F149 and till 
now it's without a file system als SDS (simple data storage) because without 
libraries it's much work to do. Another reason is that with dd the tranfer rate 
is 16 MiB / 23 s but with cp and FAT only 10 MiB / 62 s.

Best regards

Rolf Freitag


> -----Original Message-----
> From: mspgcc-users-ad...@lists.sourceforge.net
> [mailto:mspgcc-users-ad...@lists.sourceforge.net] On Behalf Of Bill
> Knight
> Sent: Monday, February 17, 2003 4:31 PM
> To: mspgcc-users@lists.sourceforge.net
> Subject: Re: [Mspgcc-users] PCMCIA and MSP
> 
> 
> Have a look here:
> http://pcmcia.org/pccard.htm
> 
> You may also want to check out CompactFlash cards at:
> http://www.compactflash.org/
> 
> Regards
> -Bill Knight
> R O Software
> 
> 
> On Mon, 17 Feb 2003 18:19:58 -0300, Pedro Zorzenon Neto wrote:
> 
> >Hi folks,
> 
> >  I think this is a little off-topic, but I don't know a better place
> to
> >post.
> 
> >  I have a PCMCIA card with non-volatile memory, and intend to use it
> >with MSP430F149.
> 
> >  I know MSP is not ideal for it, but I can access the card at a very
> >low speed, just need to write 4 bytes per second.
> 
> >  Has anyone already done something similar?
> >  Does anyone have hints about PCMCIA?
> >  Where can I find the PCMCIA specification (voltage levels, electrical
> >spec and software spec)?
> 
> >  Thanks,
> >   Pedro
> 
> 
> >-------------------------------------------------------
> >This sf.net email is sponsored by:ThinkGeek
> >Welcome to geek heaven.
> >http://thinkgeek.com/sf
> >_______________________________________________
> >Mspgcc-users mailing list
> >Mspgcc-users@lists.sourceforge.net
> >https://lists.sourceforge.net/lists/listinfo/mspgcc-users
> 
> 
> 
> 
> 
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Mspgcc-users mailing list
> Mspgcc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/mspgcc-users
> 
> 
> 
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Mspgcc-users mailing list
> Mspgcc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/mspgcc-users




Reply via email to