I believe Marco was talking about insight (v5.1.1) writing data in small chunks (37 bytes). That does take a lot of time. The current gdb (v6.0) seems to write data in larger chunks and therefore is considerably faster. Now, has anybody built insight 6.0 (it is not straight forward) and if yes, could you pls post the instructions or better yet upload the binary. And what do you people run as GUI front end for gdb? Insight is annoyingly slow when downloading, ddd requires firing up X11, gvd is standalone no more but is a part of GPS. Have not tried gdb under emacs yet ;-) And, yes, I know how to run gdb from the shell, but I'd rather not.
Suggestions? Sergei P.S. Cannot seem to make insight read the ini file. What should be the exact name and location for it? > -----Original Message----- > From: mspgcc-users-ad...@lists.sourceforge.net > [mailto:mspgcc-users-ad...@lists.sourceforge.net] On Behalf > Of nobo...@web.de > Sent: Wednesday, March 31, 2004 11:58 AM > To: mspgcc-users@lists.sourceforge.net > Subject: Re: [Mspgcc-users] debug problems > > > Hi, > > the speed is limited by the hardware and it takes 1/2 minutes > to program the 60 kB of the msp430f149. > > Rolf > > mspgcc-users@lists.sourceforge.net schrieb am 31.03.04 12:52:43: > > > > I've found the mspgcc-insight debugger very slow during the > programming > > operation. If I have a very little program it take about > 1/2 minutes to > > program the micro (msp430f149). > > Is possible to make it faster?? > > > > I've seen that the CSPY debugger is faster, but it can > debug my firmware > > (using msp430gcc) only in assebly code!!! > > Is possible to debug in C code using CSPY debugger? > > > > > > thank you, > > Marco. > > > > > > > > ------------------------------------------------------- > > This SF.Net email is sponsored by: IBM Linux Tutorials > > Free Linux tutorial presented by Daniel Robbins, President > and CEO of > > GenToo technologies. Learn everything from fundamentals to system > > > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > > _______________________________________________ > > Mspgcc-users mailing list > > Mspgcc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/mspgcc-users > > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: IBM Linux Tutorials > Free Linux tutorial presented by Daniel Robbins, President and CEO of > GenToo technologies. Learn everything from fundamentals to system > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > _______________________________________________ > Mspgcc-users mailing list > Mspgcc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/mspgcc-users >
