Hi Chris, thanks for your answer. I will try to apply -12 Volt at VEE.
regards. Paolo Santinelli. ----- Original Message ----- From: "Chris Liechti" <cliec...@gmx.net> To: <mspgcc-users@lists.sourceforge.net> Sent: Tuesday, May 25, 2004 12:58 AM Subject: Re: [Mspgcc-users] Question on graphic LCD controlled by T6963C > Paolo Santinelli wrote: > > I need to use an graphic LCD 128x128 pixel, controlled by msp430F149. > > The LCD is equipped with the Toshiba T6963C controller (LCD model: > > POWERTIP PG-128128A). I found C code from the example on mspgcc. > > sf.net. > > > > Can I power the LDC display with the single 3.3 Vdc, the msp430 > > supply voltage or I have to use a different voltages from the > > msp430 ? > > the logic (GND to VCC) should work with 3 .. 5 V. but for the contrast, > you'll probably need -12V on VEE, at least that works for the LCD i > tested the code on. > > chris > > > ------------------------------------------------------- > This SF.Net email is sponsored by: Oracle 10g > Get certified on the hottest thing ever to hit the market... Oracle 10g. > Take an Oracle 10g class now, and we'll give you the exam FREE. > http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click > _______________________________________________ > Mspgcc-users mailing list > Mspgcc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/mspgcc-users > > >
