Hansjörg Bieler wrote:
Hi everyone!
Thanx Peter Mueller for your answer. Unfortunatly the port is not the
problem: the machines are getting connected.
PLUS: the programm gets down to the chip (two times in three tries).
After download the gdb-proxy compains:
... (download messages) ...
msp430: msp430_kill()
msp430: msp430_close()
msp430: Could not find device (or device not supported) (4)
as mentioned in the other thread, the supply levels of the JTAG and VCC
of the MSP430 have to match closely. many, many problems with the JTAG
come from a bad supply (limited current, different levels, bad ground
connection, different ground levels (the PC's GND is usualy connected to
EARTH, as a scope is, but maybe your supply not, or using a different
plug)).
http://article.gmane.org/gmane.comp.hardware.texas-instruments.msp430.gcc.user/3610
So at the moment I can download the programm and try to debug with
messages on LCD-Display...
BTW: I tried to do the same on linux, but Eclipse cann't configure the
debugger (but there I have DDD).
I've got the feeling that I know enough about the things behind the
stage...
Thanx for you listening!
best regards
hbieler
-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
_______________________________________________
Mspgcc-users mailing list
Mspgcc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mspgcc-users
