Hi Dmitriy,
Have you noticed the dates on the files on opencall.org? That is when
the files were put there, and those are not the first to support the
1610, 1611 and 1612. The last update was because of issues with newer
revisions of the FG43x.
opencall.org was down for one week in the summer. That is all.
Regards,
Steve
dkorov...@luxoft.com wrote:
Steve, we have enough talkings about this. Msp430x16x chips were
supported for months/years/centuries, but WITH NO ENGINEERING SAMPLES.
That was the key problem we tried you to understand. You personally kept
deep silence when I asked you. Some guys from small former soviet
republics started joking about "bad smiths". That "right" ftp server
opencall with the most correct and new version was down. So that was the
real situation. I don't want other guys to suffer from the same
situation and help them to do development not knocking doors of "the
great gurus".
Thank you that at last you decided to pay an attention to the problems
of other developers. It's better late than never, right?
Thanks,
Dmitriy Korovkin
-----Original Message-----
From: mspgcc-users-ad...@lists.sourceforge.net
[mailto:mspgcc-users-ad...@lists.sourceforge.net]
Sent: Tuesday, October 19, 2004 5:26 PM
To: mspgcc-users@lists.sourceforge.net
Subject: Re: [Mspgcc-users] Re: Stack initialized to incorrect address
on MSP430F1611
dkorov...@luxoft.com wrote:
Hi Robert,
I can give you the following idea.
Take binutils with version >= 2.15 FROM GNU site (noone knows what
RedHat have done and if it really works). Apply my patch to add
msp430x1611 support from
https://sourceforge.net/tracker/download.php?group_id=42303&atid=432703&;
file_id=100003&aid=1020679
<https://sourceforge.net/tracker/download.php?group_id=42303&atid=432703
&file_id=100003&aid=1020679>
This works on our site. Feel free to contact me if you have problems
with this.
We also forced TI guys to add the real support for msp430x16x devices
in their msp430-gdbproxy. You may download it from
ftp://ftp.opencall.org/pub/. But this server is really slow and often
fails, so feel free to contact me if you need a Linux version of this
server.
1611 support in gdbproxy has been available for months, without any
forcing.
Regards,
Steve
