No clean exit of hardware-access? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit User-Agent: Internet Messaging Program (IMP) 3.2.6 X-Originating-IP: 213.187.75.10
Our probelm is the following: We want to put an Intel Hex-file via parallel port to the jtag-interface using jtag.exe. jtag.exe is here called by an other programm, not run directly from console. The MSP430 is correctly programmed, but at the end the calling program crashes. Our only solution so far is to build in a wait at the end for some seconds, and to disconnect jtag-hardware from the parralel port within that wait-time. Our suspicion is, that the access of the parallel-port is not properly closed, but we are not sure, if we are guessing right. Can someone tell us which source code we have to change to avoid this problem or has any other solutions like i.e. different parameters when calling jtag.exe but Greetings Markus Mauersberger markus.mauersber...@s2003.tu-chemnitz.de Mathias Esche m...@serval-se.de
