I had a similar problem with a parallel port programmer. On a functioning system msp430-jtag failed to download. Subsequent attempts to erase the flash memory produced the error:
An error occoured: Could not write target memory Using msp430-gdbproxy/gdb(DDD) I was able to erase the flash memory. msp430-jtag now functions properly as it did prior to the memory write error. You may want to try using gdb to erase the flash memory and then try the jtag programmer. (* jcl *) ------- On 3/28/06, Moussa A. Ba <m...@embedded-zone.com> wrote: > I am running the most recent msp430-jtag and trying to program a > MSP430F1611 via JTAG > here is the output. > > > $ python msp430-jtag.py -l TIUSB -u 0x4000-0x41000 > MSP430 JTAG programmer Version: 2.2 > Use -h for help > Cleaning up after error... > Reset and release device... > > An error occoured: > Could not read target memory: Invalid parameter(s) > > > $ python msp430-jtag.py -l TIUSB -ep router.txt > MSP430 JTAG programmer Version: 2.2 > Mass Erase... > Program... > Cleaning up after error... > Reset and release device... > > An error occoured: > Could not write target memory: Invalid parameter(s) > > > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a groundbreaking scripting language > that extends applications into web and mobile media. Attend the live webcast > and join the prime developer group breaking into this new coding territory! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 > _______________________________________________ > Mspgcc-users mailing list > Mspgcc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/mspgcc-users > -- http://www.luciani.org
