Hi Peter,
Could you elaborate on your second response please? Mainly, the
NO associated with developing code for the msp430x16xx. I'm having
problems with the linker in the latest Windows distribution (May 2006)
recognizing the msp430x1612, reporting an unrecognized cpu. The error
message goes on the list the supported cpus and of course the 1612 is
included.
My search of the archives discusses the inclusion of the 16xx
series a few years ago, but no subsequent mention of problems.
Am I missing something obvious or not looking in the correct
places?
Thanks
Bob Operschall
Sr. Staff Electrical Design Engineer
Advanced Products Development
ITT Aerospace/Communications Division
Fort Wayne, IN 46801
(260) 451-6736
-----Original Message-----
From: mspgcc-users-boun...@lists.sourceforge.net
[mailto:mspgcc-users-boun...@lists.sourceforge.net] On Behalf Of Peter
Jansen
Sent: Sunday, October 08, 2006 5:07 PM
To: joh...@cibolo.com; GCC for MSP430 - http://mspgcc.sf.net
Subject: Re: [Mspgcc-users] mspgcc optimization patch
Hi John,
>> The patch was for gcc-core 3.3.6
gcc-3.2.3 is the code to patch if there is a problem, its the version
being worked on and produced the best code for msp430. Ill check if this
patch applies to gcc-3.2.3.
If you make patches do them against gcc-3.2.3.
> Is gcc-3.3.6 recommended for developing msp43016xx code?
No.
> Is gcc-3.2.3 still the one to use for stable, trustworthy, if less
optimized?
3.2.3 is more optimized than 3.3.6 it makes smaller code.
Regards,
--
Peter Jansen
STS
Antarctic Division
203 Channel Highway
Kingston
TAS 7050
AUSTRALIA
Phone +61 3 6232 3533
________________________________________________________________________
___
Australian Government Antarctic Division - Commonwealth of Australia
IMPORTANT: This transmission is intended for the addressee only. If you
are not the intended recipient, you are notified that use or
dissemination of this communication is strictly prohibited by
Commonwealth law. If you have received this transmission in error,
please notify the sender immediately by e-mail or by telephoning +61 3
6232 3209 and DELETE the message.
Visit our web site at http://www.aad.gov.au/
________________________________________________________________________
___
------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT Join
SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDE
V
_______________________________________________
Mspgcc-users mailing list
Mspgcc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mspgcc-users
************************************
This e-mail and any files transmitted with it are proprietary and intended
solely
for the use of the individual or entity to whom they are addressed. If you have
received this e-mail in error please notify the sender. Please note that any
views
or opinions presented in this e-mail are solely those of the author and do not
necessarily represent those of ITT, Inc. The recipient should check
this e-mail and any attachments for the presence of viruses. ITT accepts
no liability for any damage caused by any virus transmitted by this e-mail.
************************************
