Hello James,
Thanks for the advice! I stopped playing around with 4-wire JTAG and I
decided to modify the serial JTAG programmer to support SBW. Luckily TI
has updated their Replicator Project sources:
http://focus.ti.com/mcu/docs/mcusupporttechdocsc.tsp?sectionId=96&tabId=1502&abstractName=slaa149b
It now includes a subimplementation that implements SBW. I substituted
the relevant files (LowLevelFunctionsSBW.* and JTAGfuncsSBW.*) in the
serialJTAG firmware source and modified (or rather hacked) a few things
to make it fit in again...and, amazingly.... IT WORKED INSTANTLY!! :))))
Regards,
Stephan.
James Kennedy wrote:
Stephan,
I've tried to use the 4-wire JTAG on a F2013 using TI's USB programmer
(MSP-FET430UIF) and it doesn't work either, with any of the available
toolsets. I had to switch to the new 2-wire interface to be able to
program the part.
Cheers,
James
Stephan Bosch wrote:
Do you have any experience with programming the F2013 (or similar)
processors using the Serial JTAG interface or do you see what I am doing
wrong?
--
Stephan Bosch
step...@rename-it.nl
PS: I used the wrong e-mail address last time...
