I am trying to use the MSP-FET430UIF with msp430-jtag on FC5. I downloaded the
ti_usb_3410_5052_FC4_FC5 from sourceforge and followed the
instructions in the FC5/README file.
After doing a restart I do not see the /dev/ttyUSBxx device. I do see
a /dev/bus/usb/002/004 device.
Running usbview shows the configuration listed below. Is there
anything else I need to do to get msp430-jtag to see the port?
Is there a command line option, other than /dev/ttyUSB, that I should
be using?
Thanks.
(* jcl *)
---
www.luciani.org
--usbview output
MSP-FET430UIF JTAG Tool
Manufacturer: Texas Instruments
Serial Number: TUSB34100A1BD0DE8C59FFB5
Speed: 12Mb/s (full)
USB Version: 1.10
Device Class: ff(vend.)
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 0451
Product Id: f430
Revision Number: 1.01
Config Number: 1
Number of Interfaces: 1
Attributes: 80
MaxPower Needed: 100mA
Interface Number: 0
Name: (none)
Alternate Number: 0
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 1
Endpoint Address: 01
Direction: out
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
