I am trying to use the MSP-FET430UIF with msp430-jtag on FC5. I downloaded the
ti_usb_3410_5052_FC4_FC5 from sourceforge and followed the
instructions in the FC5/README file.
After doing a restart I do not see the /dev/ttyUSBxx device. I do see
a /dev/bus/usb/002/004 device. Also after disconnecting and
reconnecting the USB connector I ran dmesg and noticed that the
firmware didn't download. I am not sure what -32 or error -5 is.
Has anyone had success with FC5 and the FET430UIF?
Thanks.
(* jcl *)
---
www.luciani.org
--- dmesg output
usb 1-2: new full speed USB device using ohci_hcd and address 5
usb 1-2: configuration #1 chosen from 1 choice
ti_usb_3410 1-2:1.0: TI USB 3410 1 port adapter converter detected
usb 1-2: ti_download_firmware - error downloading firmware, -32
ti_usb_3410: probe of 1-2:1.0 failed with error -5
--usbview output
MSP-FET430UIF JTAG Tool
Manufacturer: Texas Instruments
Serial Number: TUSB34100A1BD0DE8C59FFB5
Speed: 12Mb/s (full)
USB Version: 1.10
Device Class: ff(vend.)
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 0451
Product Id: f430
Revision Number: 1.01
Config Number: 1
Number of Interfaces: 1
Attributes: 80
MaxPower Needed: 100mA
Interface Number: 0
Name: (none)
Alternate Number: 0
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 1
Endpoint Address: 01
Direction: out
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
