Hi David, Thanks for the reply. I have already tried this but unfortunately didn't work for me. I still get the same errors. I think I'm missing something else in my parport configuration.... Thanks anyway. A
On Dec 15, 2007 3:28 AM, David Smead <[email protected]> wrote: > Angela, > > Here's what I do as root to use the parallel port for msp-gdbproxy or > OpenOCD. > > /etc/init.d/lpd stop > mknod /dev/parport0 c 99 0 > chmod 777 /dev/parport0 > > I also have this gdb command in .gdbinit so I don't have to remember too > much. > > define remo > echo (gdb) target remote :2000\n > target remote :2000 > end > > I hope this helps. > > > > Sincerely, > > David Smead > www.amplepower.com > www.amplepower.net > > > On Sat, 15 Dec 2007, Angela Perez wrote: > > > Hi guys, > > > > I'm really new to msp430 and jtag, and as part of my university project > I > > have to manage somehow to use jtag and msp430-gdb. I have read the > manual, > > and unfortunately have been unsuccessful... > > > > I'm using linux (debian) kernel 2.6.x and parallel jtag adapter. > > > > msp430-gdbproxy gives me the following error: > > error: msp430: Could not find device (or device not supported) (4) > > > > dmesg shows this: > > [ 3487.084000] ppdev0: registered pardevice > > [ 3487.212000] ppdev0: released pardevice because user-space forgot > > [ 3487.212000] ppdev0: unregistered pardevice > > > > I assume there is something wrong with my config but don't know where to > > start.... > > > > /dev/parport0 is read/writable by everyone and I have stopped cupsd - no > > other programs/daemons are using the parallel port. > > > > Any advice would be really appreciated as I'm kinda lost here. Might be > that > > my question is really silly but I'm really new to this stuff so > apologies in > > advance :) > > > > My device is a tmote sky from moteiv. > > > > Thanks > > Angela. > > > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > Mspgcc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/mspgcc-users >
