On 2008-06-10, Chris Liechti <[email protected]> wrote:
> Grant Edwards schrieb:
>> Since msp430-gdbproxy doesn't support the '23x0 chips,
>
> you tried the latest version (especially of MSP430.so/dll from
> http://soft-switch.org/downloads/mspgcc/?
Yes.
> if you're using windows you might also try to use a
> MSP430.dll+HIL.dll from a FET kit.
Tried that also.
>> Any ideas what would cause constant JTAG communication problems
>> for the IAR debugger that wouldn't affect msp430-jtag or the
>> Elprotronic flash programmer?
>
> if the device has spy-bi-wire support it depends on the JTAG
> adapter and software you use...
It's "regular" JTAG. msp430-jtag can talk to the board via
both parallel and USB (Linux host). Elprotronics can talk
to it via USB (Windows host). IAR can program flash via USB
(Windows host).
When I try to run the program in IAR, things get sketchy. If I
reset the part via the button on the debugger, I can sometimes
hit "step" a couple times and step through a couple
instructions before I get the communications failure. If I hit
"go" I usually get a comm failure, but if I click "retry" it
sometimes starts, sometimes it's another comm failure. Once
it's running, it runs fine. Clicking "stop" sometimes works,
sometimes produces a comm failure.
--
Grant Edwards grante Yow! BARRY ... That was
at the most HEART-WARMING
visi.com rendition of "I DID IT MY
WAY" I've ever heard!!
