Hi Robert,
Thanks for your help.

Basically, I am facing a problem as, I don't know how to upload
firmware to eZ430-RF2480.
As, per my understanding to get detected as /dev/ttyUSB0,
ti_usb_3410_5052. drivers needs to upload firmware
to device. once this is successful, I can echo 2 to bConfigurationValue.

But my driver on Ubuntu, doesn't downloads firmware at all.
and every time I get this in dbesg,

[  118.882620] usbcore: registered new interface driver usbserial
[  118.882648] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c:
USB Serial support registered for generic
[  118.882693] usbcore: registered new interface driver usbserial_generic
[  118.882696] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c:
USB Serial Driver core
[  118.898012] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c:
USB Serial support registered for TI USB 3410 1 port adapter
[  118.898031] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c:
USB Serial support registered for TI USB 5052 2 port adapter


I tried above procedure, with 2.6.27 also, with no sucess.
Do you have any Idea, of this problem?

Thanks and Regards,
Shivdas Gujare

On Mon, Jan 19, 2009 at 1:27 AM, Robert Spanton <[email protected]> wrote:
> Hi Shivdas,
>
> Shivdas Gujare wrote:
>> So, Do I needs to upgrade any firmware to get it working with linux,?
>> Why my eZ430 doesn't shows two configurations?
>> Do I needs to modify drivers/usb/serial/ti_usb_3410_5052.c to get it
>> working with my linux m/c.(kernel 2.6.24)?
>
> There was some breakage with using the UIF and EZ430 under Linux 2.6.24.
> This has since been fixed in later releases.  If you can't update your
> kernel, then you can install the fix that I published here:
> http://xgoat.com/wp/2008/03/24/uif-fixing/
>
> Hope that helps :-)
>
> Rob
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by:
> SourcForge Community
> SourceForge wants to tell your story.
> http://p.sf.net/sfu/sf-spreadtheword
> _______________________________________________
> Mspgcc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/mspgcc-users
>
>

Reply via email to