Tamas,
you are really close to success.
Add the
-mmcu=msp430x2013
switch to compiler and linker command lines.
If you don't specify a -mmcu switch, it defaults to msp430x110 which has
to few flash for the code to fit in.
You may ignore the extern warning, or just remove the extern keyword
from lines 104+105 of CC1100-CC2500.c.
char paTable[] = {0x51};
char paTableLen = 1;
Because on these tho lines, the variables are defined and declaring
variables as extern on the lines they are defined does not make sense to me.
I declared the
ISRs as
interrupt (PORT1_VECTOR) port1_ISR (void)
interrupt (PORT1_VECTOR) port2_ISR (void)
the main as
int main (void)
and put a while after the _BIS_SR ...
_BIS_SR(LPM3_bits + GIE); // Enter LPM3, enable
interrupts
while(1) {};
just to get rid of some warnings ...
After above changes, one warning resides:
subscript has type `char' in TI_CC_spi.c line 267, which may be ignored
here.
description: http://wiki.netbsd.se/GCC_warnings_explained
Good luck!
Matthias
Tamas schrieb:
> Hi,
>
> I have just started dealing with the msp430, and I would like to ask some
> help.
> http://focus.ti.com/mcu/docs/mcusupporttechdocsc.tsp?sectionId=96&tabId=1502&abstractName=slaa325
> I am trying to port the above IAR msp430 - cc1100 interfacing code
> library (and simple example) to MSPGCC, but I cant get rid of this
> error:
>
> CC1100-CC2500.c:105: warning: `paTable' initialized and declared `extern'
> CC1100-CC2500.c:106: warning: `paTableLen' initialized and declared `extern'
> msp430-ld: region text is full (main.elf section .text)
> msp430-ld: region text is full (main.elf section .text)
> msp430-ld: section .data [0000fc00 -> 0000fc01] overlaps section .text
> [0000fc00 -> 00010103]
>
> The command I issue:
> msp430-gcc -Os -g -C99 -o main.elf main.c CC1100-CC2500.c TI_CC_spi.c
>
> The target mcu is the MSP430F2013 with 2kB+256B Flash and 128B RAM.
> All I have done so far: changed the syntax of the interrupt routine
> according to the content of the isr_compat.h: ISR(PORT1,sw_int) { },
> amended the mcu header to msp430x20x3.h in the
> TI_CC_msp430.h file, and reduced the number of switches and LEDs since
> the F2013 has only 10 I/Os. I included these files in the main.c:
> #include <isr_compat.h>
> #include <signal.h>
> #include <msp430x20x3.h>
>
> Does anyone have any idea how to solve this?
> I would really appreciate the help I get!
>
> Cheers,
> Tamas
>
> ------------------------------------------------------------------------------
> Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
> -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
> -Strategies to boost innovation and cut costs with open source participation
> -Receive a $600 discount off the registration fee with the source code: SFAD
> http://p.sf.net/sfu/XcvMzF8H
> _______________________________________________
> Mspgcc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/mspgcc-users
>
>
>
>
