I would ask that erase main and erase info be supported as they are for msp430-gdbproxy instead of creating new commands. Jesse
On Thu, Sep 9, 2010 at 1:17 AM, Michiel Konstapel <[email protected]> wrote: > Hi Daniel, > > Would it be possible to add "mass erase" and "info erase" commands in a > future version? > > Kind regards, > Michiel > >> -----Original Message----- >> From: Daniel Beer [mailto:[email protected]] >> Sent: donderdag 9 september 2010 5:52 >> To: GCC for MSP430 - http://mspgcc.sf.net >> Subject: [Mspgcc-users] MSPDebug version 0.11 >> >> A new version of MSPDebug is available now. There are still a few >> outstanding issues with some chips, but there's been quite a lot added >> so I thought it was about time to put together a new release. Notable >> features in this one: >> >> * Support for programming and debugging 20-bit devices. >> * Support for MSP430X instruction set. >> * Support for new chips: MSP430F2234, CC430F5137, MSP430F2618, >> MSP430F1612, MSP430F47197, MSP430F1232, MSP430F413, MSP430F2370. >> * Bug fixes: RF2500 support on OS/X, chip identification using > FET. >> * Added quiet mode to supress debug output. >> * Faster gdb transfers. >> * Faster polling with FET driver (quicker single-stepping and >> breakpoint detection). >> * Commands can now be issued, and output received, via the gdb >> interface (using "monitor"). >> * Support for FET430UIF firmware updates via BSL. >> >> Available, as always, from: >> >> http://mspdebug.sourceforge.net/download.html >> >> - Daniel > > ------------------------------------------------------------------------------ > This SF.net Dev2Dev email is sponsored by: > > Show off your parallel programming skills. > Enter the Intel(R) Threading Challenge 2010. > http://p.sf.net/sfu/intel-thread-sfd > _______________________________________________ > Mspgcc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/mspgcc-users >
