On Wed, Oct 10, 2012 at 07:47:08AM +0200, Michiel Konstapel wrote: > Trying to open UIF on /dev/ttyUSB0... > Initializing FET... > FET protocol version is 20401000 > Configured for JTAG (2) > Set Vcc: 3000 mV > fet: FET returned error code 4 (Could not find device (or device not > supported)) > fet: command C_IDENT1 failed > fet: identify failed > Trying again... > Initializing FET... > FET protocol version is 20401000 > Configured for JTAG (2) > Sending reset... > Set Vcc: 3000 mV > Device ID: 0xf26f > Code start address: 0x3100 > Code size : 118528 byte = 115 kb > RAM start address: 0x200 > RAM end address: 0x9ff > RAM size : 2048 byte = 2 kb > Device: MSP430F2618 > Code memory starts at 0x3100 > Number of breakpoints: 8 > fet: FET returned error code 11 (Could not reset device) > fet: message C_IDENT2 failed > fet: identify failed
Hi Michiel, Looks like perhaps I have broken something, though I can't see what it might be. Does the first attempt at identification always fail with 0.20, and never fail with 0.18? Would you mind trying the latest git version to see if that works? - Daniel -- Daniel Beer <dlb...@gmail.com> www.dlbeer.co.nz IRC: inittab (Freenode) PGP key: 2048D/160A553B ------------------------------------------------------------------------------ Don't let slow site performance ruin your business. Deploy New Relic APM Deploy New Relic app performance management and know exactly what is happening inside your Ruby, Python, PHP, Java, and .NET app Try New Relic at no cost today and get our sweet Data Nerd shirt too! http://p.sf.net/sfu/newrelic-dev2dev _______________________________________________ Mspgcc-users mailing list Mspgcc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mspgcc-users
