Hello Fávero, Try to follow the procedure described in the update and downgrade section.
Thanks, Thomas Mitnacht Texas Instruments Deutschland GmbH, Haggertystr. 1, D-85356 Freising. Amtsgericht München HRB 40960. Geschäftsführer: Dr. Wolfram Tietscher. Vorsitzender des Aufsichtsrates: Andreas Schwaiger -----Original Message----- From: Fávero Santos [mailto:favero.san...@gmail.com] Sent: Dienstag, 1. Juli 2014 15:40 To: mspgcc-users@lists.sourceforge.net Subject: [Mspgcc-users] tilib: MSP430_FET_FwUpdate: MSP-FET430UIF Firmware erased - Bootloader active (error = 56) Hello! I was updating my fet430uif when I accidentally disconnected my device. Before it happened, it was working like a charm - no problems whatsoever, I could flash and debug nicely. Now even the leds initialization sequence doesn't work. I've tried to update the fet's firmware, but, sadly, no luck. I tried investigating what happened to my fet and called some update functions: a) mspdebug tilib -d /dev/ttyACM0 : tilib: MSP430_FET_FwUpdate: MSP-FET430UIF Firmware erased - Bootloader active (error = 56)" b) mspdebug tilib -d /dev/ttyACM0 --require-fw-update Uifv3Downgrader.txt: ... Updating firmware using Uifv3Downgrader.txt Starting firmware update (this may take some time)... Initializing bootloader... Initializing bootloader... Initializing bootloader... tilib: MSP430_FET_FwUpdate: MSP-FET430UIF Firmware erased - Bootloader active (error = 56) tilib: device initialization failed c) mspdebug uif-bsl -d /dev/ttyACM0 "prog Uifv3Updater.txt" Trying to open /dev/ttyACM0 at 460800 bps... comport: read error: Connection timed out bsl: failed to enter bootloader bsl: warning: FET firmware not responding comport: read error: Connection timed out bsl: failed to receive reply comport: read error: Connection timed out bsl: failed to receive reply bsl: sync failed bsl: failed on command 0x38 (addr = 0x0ff0, len = 0x0010) bsl: failed to read chip info So, yeah, everything points that the msp430f1612 in my fet is erased. My question is: how to revive my fet if I don't have a firmware image? Some points: 1) It was a V3 firmware in the good old days. 2) Already tried using elprotronic flasher to update my fw but with no results. That's it guys, hope you can give some hints on what to do. Thank you for your time and effort reading my problem. Sorry for the lazy english. Regards FS *"If it doesn't starts with you, it dies with you." * Julian Casablancas ------------------------------------------------------------------------------ Open source business process management suite built on Java and Eclipse Turn processes into business applications with Bonita BPM Community Edition Quickly connect people, data, and systems into organized workflows Winner of BOSSIE, CODIE, OW2 and Gartner awards http://p.sf.net/sfu/Bonitasoft _______________________________________________ Mspgcc-users mailing list Mspgcc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mspgcc-users
